Wood Restaurant Table Top Example Pricing
Example pricing shown below for some
popular sizes. Butcher Block Style 1
½" Thick and Plank Style 1
¾" Thick.
If you need a large quantity of table tops or you are working with us on a project that includes other products we'll quote accordingly.
We discourage residential inquiries for large tops due to shipping and delivery problems.
Many other standard sizes are also available.
Wood table tops are heavy! Please provide
your shipping destination city and ZIP code so that we can include freight charge
estimates. Most sizes are too large to ship via UPS.
April, 2009
|
Solid Wood Table Edge Profiles
|
|
|
|
|
|
|
|
A5 Bullnose
|
D5 Rounded
|
E5 Straight
|
P5 Beveled
|
S5 Ogee
|
| Standard Stains (Shown On
Oak) For stains add $12 per top. |
 |
 |
 |
 |
| Natural Oak |
Weathered Wood |
Teak |
Eastern Red Cedar |
 |
 |
 |
 |
 |
| Early American Maple |
Walnut Grove |
Classic Oak |
Cherry Bark |
|
 |
 |
 |
|
| Rich Mahogany |
Fruitwood |
Walnut |
|
|
| Wood stains are shown on red oak. Final stain color is affected by porosity and grain. If you are doing critical color matching please request a sample. |
| Standard
Stains (Shown On Maple) For stains add $12 per top.
|
 |
 |
 |
 |
| Natural |
Weathered Wood |
Teak |
Eastern Red Cedar |
|
 |
 |
 |
 |
| Early American Maple |
Walnut Grove |
Classic Oak |
Cherry Bark |
|
 |
 |
 |
|
| Rich Mahogany |
Fruitwood |
Walnut |
|
|
| Wood stains are shown on maple. Final stain color is affected by porosity and grain. If you are doing critical color matching please request a sample. |
Wood tables will occasionally warp.
Wood is a sponge like material made of cells and fibers that swell and shrink depending on the temperature and moisture in the surrounding air. When a tree is cut down, first of all the water in between the cells evaporates, then some of the water inside the cells dries out. Drying from its green condition, wood will retain its original dimensions until the moisture content falls to about 30%. A certain percentage of water always remains. With air-seasoning, the moisture content of most types of wood will fall to between 23 and 17%, at which level it will be in balance with the moisture content of the air around it. In pre-central heating and air conditioning days, the wood would be stable enough to make into furniture. Wood table manufacturers now kiln dry lumber to further reduce moisture content and make the material more stable. All manufacturers have some tolerance for some warping (as much as 1/8" per lineal foot). It is an unavoidable fact of nature. If you find you have warped table top immediately after receiving your order we can help determine if the warping is within the manufacturer's tolerance.
To avoid warping after you begin using wood table tops a cool environment (72 degrees) with a relative humidity of about 50-55% and a little bit of air movement is said to be ideal for wood objects in general. Change thermostat settings gradually as seasons change. A sudden change in temperature or humidity is the worst thing possible as moisture will be sucked out of or pushed into the material far too quickly causing tension inside it. Excess heat and dryness can even cause cracking and splitting. Avoid extremely hot plates, excessive water allowed to stand for long periods. Also avoid vinyl table cloths and glass tops as they can prevent air circulation and cause warping.
Kurt Petersen P.O. Box 222 Park Ridge, Illinois 60068 Telephone 847-692-5458 FAX 847-692-6817
E-Mail: kurt@kpetersen.com
Copyright © 2004 - 2009 Petersen Furniture, Inc. All rights
reserved. So there!
We Use DIGIMARC
Digital Watermarking in many of our website images.