Brushed Stainless Steel Table Tops

Brushed stainless steel table tops for restaurant dining rooms. Two styles available:
Stainless steel table tops with plywood cores with wrapped edges and welded corners or stainless steel table tops with particle board cores and black vinyl T mold edge.
Stainless steel table tops can be attached to standard restaurant table bases with ordinary wood screws. Made in the United States.
Three table top minimum order.

Stainless steel table tops with plywood core,
wrapped edges and welded corners

Stainless Steel Table Top Page Spacer

Stainless steel table tops with particle board core,
black vinyl T mold edge

Stainless Steel Table Top DetailStainless Steel Table Top Square
Click For Stainless Steel Table Top Detail

Stainless Steel Table Top Page Spacer

Stainless Steel Table Top Round
Click For Vinyl Edge Stainless Steel Table Top Detail

Stainless Steel Table Top Page Spacer

All table tops are covered in 16 gauge, 304 alloy #4 brushed stainless steel.
Overall table top thickness is approximately 1 ¼" thick.

Stainless steel table top with plywood core,
wrapped edges and welded corners

Stainless steel table top with particle board core,
black vinyl T mold edge

Stainless Steel Table Top Page Spacer

Ea. Price Quantity 3 - 4

5 - 10

11 +

Stainless Steel Table Top Page Spacer Stainless Steel Table Top Page Spacer

Ea. Price Quantity 3 - 4

5 - 10

11 +

24" X 24" $351 $321 $295 Stainless Steel Table Top Page Spacer 24" X 24" $238 $219 $195
24" X 30" $357 $327 $300 24" X 30" $242 $223 $198
24" X 42" $470 $430 $398 24" X 42" $351 $322 $292
24" X 48" $470 $430 $398 24" X 48" $354 $325 $295
30" X 30" $377 $345 $318 30" X 30" $245 $225 $201
30" X 42" $481 $440 $407 30" X 42" $355 $326 $296
30 X 48" $481 $440 $407 30 X 48" $360 $336 $299
30" X 60" $562 $515 $477 30" X 60" $366 $338 $305
30" X 72" $562 $515 $477 30" X 72" $373 $344 $312
36" X 36" $505 $486 $428 36" X 36" $361 $332 $300
36" X 48" $505 $486 $428 36" X 48" $369 $340 $307
36" X 60" $693 $636 $589 36" X 60" $504 $463 $424
36" X 72" $693 $636 $589 36" X 72" $512 $470 $430
36" X 96" $777 $712 $662 36" X 96" $613 $564 $517
42" X 42" $505 $463 $428 42" X 42" $370 $340 $308
48" X 48" $640 $586 $555 48" X 48" $515 $473 $433
24" Round 24" Round $247 $226 $200
30" Round 30" Round $254 $231 $206
36" Round 36" Round $370 $338 $305
42" Round 42" Round $364 $480 $438
48" Round 48" Round $364 $480 $438
54" Round 54" Round $540 $480 $438
60" Round 60" Round $540 $480 $438

July 2014
Three table top minimum order.
All Pricing Shown For Budget Purposes Only. ALL Projects MUST BE QUOTED.

Space
Stainless steel table tops are not scratch proof. Like any metal surface stainless steel tops will pick up scratches and abrasions with normal use.

Scratches in stainless can be buffed out with Scotch Brite pads or very fine grit sand paper (steel wool is not recommended due to the mild steel fibers
contaminating the stainless surface therefore leaving rust colored stains).

It is also recommended that the surface of the grain is followed in the same direction when buffing out scratches. Stainless steel tables although very resistant to corrosive
environments do require periodic care and maintenance. Cleaning is necessary on all grades of stainless to prevent corrosive particles from gathering in
the grain of the stainless surface. This results in a rust colored staining. One might think that the stainless is actually rusting, but it is actually the
corrosive particles that are reacting and causing the staining. Weekly cleaning with a good stainless cleaner will keep the surface free from corrosive particles.
In environments where there is salt, chlorine or air pollution present, a weekly cleaning with water and liquid detergent followed by drying will keep the stainless
surface free from contamination. If staining has occurred the surface can be cleaned with a non abrasive, non chlorine kitchen cream cleanser.
Space

 

Stainless Steel Table Top Page Spacer
Return Home
Stainless Steel Table Top Page Spacer
Stainless Steel Table Top Page Spacer
Return To Table Descriptions
Stainless Steel Table Top Page Spacer

Kurt Petersen P.O. Box 643 Naperville, IL 60566 Telephone 847-692-5458 FAX 847-692-6817

E-Mail: sales@kpetersen.com

Copyright © 2009 - 2014 Petersen Furniture International, Inc. All rights reserved. So there!
We Use DIGIMARC Digital Watermarking in many of our website images.