17" Diameter and 23 ½" Diameter 304 outdoor grade 1mm thickness, #4 satin finish Stainless
Steel Shroud over Steel Counter Weight Ballast Bottom.
17" Base comes with a 2 ½" Diameter Column, 23 ½" Base comes with a 3" Diameter Column. Available Dining Height, Bar Height and Counter Height.
|
|
|
|
Wine Glass Stem Shaped Stainless Steel Table Base 17" Diameter |
Wine Glass Stem Shaped Stainless Steel Table Base 23 ½" Diameter |
|
|
|
|
Trumpet Shaped Stainless Steel Table Base with Granite Table Top Not Included - Sold Separately |
Trumpet Shaped Stainless Steel Table |
| These 304 grade stainless steel table bases are very resistant to corrosive environments but do require periodic care and maintenance. Cleaning is necessary on any grade stainless steel to prevent corrosive particles from gathering in the grain of the stainless steel surface. Corrosive particle build-up results in a rust colored stain. One might think that the stainless steel is rusting but it is actually the corrosive particles that are reacting and causing staining. Weekly cleaning with a good stainless steel cleaner will keep the stainless steel surfaces free from corrosive particles. In environments where there is salt and or chlorine present weekly cleaning with water and liquid detergent followed by drying will keep the stainless steel surface free from contamination. If staining has already occurred the surface can be cleaned with a non abrasive kitchen "cream" cleanser. The spider and the ballast plate are not stainless steel. We cannot guarantee these components against corrosion. A protective spray and/or frequent drying is necessary if the table bases are to be left outside or used in a corrosive environment. |
|
Kurt Petersen P.O. Box 222 Park Ridge, Illinois 60068 Telephone 847-692-5458 FAX 847-692-6817
E-Mail: kurt@kpetersen.com
Copyright © 2012 Petersen Furniture, Inc. All rights
reserved. So there!
We Use DIGIMARC Digital Watermarking in many of our website images.